Graphic Arts Equipment Co. 

Serving the Graphic Communications Industry since 1938!

Offset  ·  Letterpress  ·  Bindery  ·  Prepress  ·  Die Cutting  ·  Converting  ·  Flexographic  ·  Packaging  ·  Mailing  ·  Fulfillment 

800-423-2520


Home
Used Equipment
New Equipment
Products
Contact Us
Search

 

Rosback TrueScore-Pro

 

ELIMINATE CRACKING

WITH THE TRUESCORE-PRO

FASTER, EASIER,

MORE PRODUCTIVE

No need to pull shafts to change scoring discs!!!!!!

 

 

 

HOW THE TrueScore-Pro WORKS

 

The upper head holds a color-coded male disc. Each colored disc is selected for a particular weight of stock. The lower head has various female groove widths. When the heads engage, the upper male disc gently stretches the fibers into the female ring, providing a deep, perfect score and crack free fold every time.

   
Easy Set-up & Operation
  • Choose a female groove width. Determine lower scoring head location for the job and lock into position.

  • Choose a male scoring disc. Position the upper head so that the male scoring disc is centered over the chosen lower female groove. Lower the upper head with the pitch control lever. Fasten upper scoring head setscrew.

  • Run a sheet through and adjust pressure as normal until the desired score depth is reached.

  • To change scoring discs simply unscrew the upper head nut, remove and replace the scoring disc. This can be done with the upper head remaining on the shaft

  • The blue disc produces a narrow score, perfect for paper and other light stock materials.

  • The black disc produces a medium score.

  • The red disc produces a wider score for heavier card and cover stocks.

  • Using two standard TrueScore-Pro heads, the minimum line-line spacing is 1-inch.

  • For perfect bound book covers, consider the TrueScore-Pro Quad (#220-A-206) for use on Rosback machines. These versatile heads create a wide range of spine and hinge covers.

Each Kit Contains:
  • 1-Upper Male Head

  • 1-Lower Female Head

  • 1-Black Male Scoring Disc

  • 1-Blue Male Scoring Disc

  • 1-Red Male Scoring Disc

  • 1-Allen Key for Heads

  • 1-Set Head Wrenches
 
  Price per Kit

#220-A-203 for Rosback machines

$1,190.00
#TS25-A-010 for 25mm folders $1,275.00
#TS30-A-010 for 30mm folders $1,275.00
#TS35-A-010 for 35mm folders $1,275.00

 

TrueScore-Pro Quad

 

HOW THE TrueScore-Pro Quad WORKS

The upper head has a selection of two color-coded male scoring discs for a large range of stock weight. The lower head has a selection of two female grooved rings having different groove widths. When the heads engage, the male scoring disc gently stretches the material into the female ring groove, providing a deep, perfect crease and crack free fold every time. The heads can be assembled to have a male scoring disc with a female groove ring on the same head, if required. Spacer rings on each head assembly are used to change the dimension from the spine score to the hinge score.

 

Easy Set-up & Operation
  • Assemble chosen female rings with spacers as required onto two hubs. Determine both lower scoring head locations for the job and lock onto lower cutter shaft.

  • Assemble chosen male scoring discs with spacers as required onto two hubs. Position the upper heads on the upper cutter shaft so that the male scoring discs are centered over the female grooves. Fully lower the upper cutter shaft. Turn hand wheel a couple of times and lock onto upper cutter shaft.

  • Run a sheet through and adjust upper cutter shaft as normal until the desired scoring depth is reached.

  • To change male scoring discs, remove three screws and slide scoring discs with support discs along shaft. Twist scoring disc and remove from shaft, replace scoring discs and re-assemble while the heads are still on the shaft.

  • The black scoring disc with the smaller female groove ring (black) produces a smaller crease, perfect for heavy paper and light cover stock materials.

  • The red scoring disc with the larger female groove ring (white) produces wider crease for heavier card and cover stocks.

  • The minimum spine-to-spine score is 1/4”. The minimum spine-to-hinge score is 1/4” Using supplied spacer rings 3/8” and 1/2” spine-to-hinge score is obtainable.

 
  Price per Kit

#220-A-206 for Rosback machines

$2,375.00

 

 

 
 

All prices subject to change without notice.

 

Copyright © 2016 Graphic Arts Equipment Co.